cards, Catalogues, Sale-A-Bration, Tutorials

PARTY PANDA POCKET CARD!

I am going to miss these Party Pandas.  Seriously, aren’t they so cute??  I had to use them again for one last blast.  I saw THIS POCKET CARD by Barbstamps the other week and thought the Pandas would be great for it.

Here is my version.

MEASUREMENTS FOR POCKET CARD

If you head to Barb’s link at the top you can see the video with the instructions to make the card.  Below is a general idea.

Card Base:    21cm x 14.8cm     (8 1/2″x 5 1/2″)    Score at 3.5 cm and 10.5cm.          (Score at 1 1/2″ and 4 1/4″)

Fold in at the half way score line and fold back on the small scored line.  Staple or adhere the front of the card to the back.  Underneath the flap so you don’t see the staples.

Designer Series Paper: Top piece – 14.4cm x 3.1cm     (approximately 5 1/4″x 1 1/4″)        Bottom piece:  14.4cm 3.6cm   (aprroximatly 5 1/4″ x 1 1/2″)

Cut the stamped piece for the image according to the size of your image.  This piece for the Panda was card mat: 6.9cm x 5.5cm    Whisper White 6.5cm x 5.1cm.

Pocket Insert: 13.2cm x 10cm   (5 1/8″x4″)   Whisper White 12.8cm x 9.6cm   (5″x 3 3/4″)

——

On the Panda stamped piece I coloured a Rhinestone with the Pumpkin Pie Stampin’ Blends.

The Designer Series Paper is from the Bubbles and Fizz pack that is a Free choice with Sale-A-Bration.

Hope you like it,

Jenny

 

3D projects, cards, Catalogues, Classes

CHARMING CAFE MAKE AND TAKE!

Last weekend I had my Catalogue Kick Off for the year.  It was so great to get back stamping with my lovely class ladies.  We do have fun.  This is our “therapy”.  I am sure you can relate to that.

We looked at a lot of the new products in the Occasions Catalogue and the excitement of Sale-A-Bration.  Of course we did do some stamping surprisingly. 😉

I thought I would share you some of the fun.  If you are on my Facebook page you might have seen the video I shared.  I am not able to share it here but you can check it out -> HERE if you like.  Just scroll down a bit and you will come across the video.  By the way, Have you LIKED my page yet.  You can keep updated there on some of the excitement.

One of the Make and Takes we did was using the Charming Cafe Bundle.  I shared some tips with using this bundle on a post or 2 back.   You can head back there to check it out.

I kept the card fairly simple for the class.  The images were stamped in Memento Black and coloured with the Watercolor Pencils.  They weren’t watercoloured so it was OK just to use the Memento.   The paper is from the free Bubbles and Fizz Designer Series Paper from Sale-A-Bration.  Just a tip:  Adhere your piece of DSP to the card base BEFORE you cut the window with the Framelit.  Much easier. 😉

The sentiment is from the Thoughtful Banners set.  I love the gorgeous Whisper White Organza ribbon. So soft and beautiful.  It ties so easily too.  You need to get yourself some of that.

The other project we made was using the new Whisper White Narrow Note Cards and Envelopes. You can find these on page 19 in the Occasions catalogue.

I have used the Bubbles and Fizz DSP on these and of course added a cute hedgehog from the Hedgehugs set.

These little cards don’t take long to decorate and they are great for that little note to someone or a good size for a Gift Card. Don’t forget to stamp the matching envelope when you make these.

I made up little gift packs too to thank everyone for coming.  They were a mix of the Bubbles and Fizz paper and the Petal Passion paper.  I added some diecuts from the Celebrate You Thinlits.  The sentiment on the front is from Epic Celebrations.

Of course there is the Lucky Door Prize.  I made up little gift boxes using the Silver Gable Boxes and decorated them with the Bubbles and Fizz paper.  I had some of the new Glitter and Clear Epoxy Shapes, an ink spot and some ribbon.

I will share some samples over the next few posts too so stop by again.

Jenny

3D projects, Blog Hops, cards, Catalogues, Stampin' Up!, Tutorials

STAMPIN’ DREAMS BLOG HOP – IT’S A LOVE THEME!

We are back with the Stampin’  Dreams Blog Hops for 2018.  We start off the year with a Love theme.  You might have come from the super, talented Juana’s Blog or starting here with me.  Either way, enjoy the Hop.

I don’t do a lot of  “lovey dovey” stuff and don’t usually do anything for Valentine’s Day but lately I have had to do a lot of wedding and engagement cards so maybe this Hop would be a good one for me. 🙂

For my project I have created a “love” Panel card and Gift Card Holder.  

I just received the Bubbles and Fizz Designer Series Paper which is a Free choice for Sale-A-Bration.  I noticed in the pack this sheet with the circled hearts in Calypso Coral so I thought I would use that.  It looked pretty cool! The Panel card idea was inspired by a card from a recent papercrafts Magazine.  I thought it was a little bit different to the standard card.

Here is a closer view of it.  The middle section of the base card is cut off and a separate card mat adhered to the front.  I will give you details to make your own further below.

I added the hearts from the Sunshine Wishes Thinlits in Calypso Coral and Dazzling Diamonds Glimmer Paper.  It needed something else when I had finished so I added a little bow with the Calypso Coral Sheer Ribbon.

The Gift Card holder is created with the Envelope Punch Board with the Gift Card size and scoring instructions on the board (the first one listed).  I added a strip of the Designer Series paper around it.  Just a note on that:  As the card holder is made in card it is a little thicker so the flap can’t tuck in to the envelope without  squishing it.  So I just left it open.   The “for you” is from the Mini Treat Bag Thinlits.

CREATE YOUR OWN PANEL CARD.

– Cut a standard size Card base.  From the front panel cut a piece off the front at 3cm (1 1/4″) down from the front score line.  On the piece you cut off, cut a piece off that at 3cm (1 1/4″).  **NB: For Imperial do check the measurements.  Basically you are cutting off a section down from the top of the fold line and then cutting a piece of that cut off section the same measurements.  You can vary the measurements to however you like.

– Make the panel piece the size you like.  This piece, the Calypso Coral mat measures 8cm x 12.3cm (3 1/8″ x 4 7/8″).  The Designer Series Paper piece is just slightly smaller.

– To assemble the card.  Lay down the White card strip that you cut off previously.  Line it up with the bottom edge of the back of the card base.  Adhere the panel on to the top and bottom edge pieces remembering to only place adhesive at the top and bottom at the back of the card mat for the panel.  I hope that makes sense. 🙂


NOW CONTINUE TO HOP

Now you can continue on your way around the Blog Hop to see the other “Love” projects.   Head on your way to Alejandra’s Blog -> HERE.  (I can’t add the list of participants on my hop as I have a WordPress blog but you shouldn’t get lost, just keep following the links on other blog posts).

Enjoy,

Jenny

cards, Catalogues, Challenges

COLOUR INKSPIRATIONS #CI25

The Colour Inkspirations Challenges are back for 2018.  I am excited about that.  I really enjoyed taking part last year so I am ready again.

This week’s Challenge #CI25 is with the colours Night of Navy, Lemon Lime Twist and Whisper White.  I do like blue and lime together.  I have to say I was a little intimidated.  I have been watching the cards entered for the challenge over on the Facebook group HERE and thought, should I really bother??  There are some AMAZING creations! But it’s about challenging yourself so I did have a go.  SO … here is my card.

I have used the Epic Celebrations set from Sale-A-Bration.  I was inspired to colour the sneakers a bit like this from a card on Pinterest but then I couldn’t go back and find the card when I went to check it.  Maybe it was on a Facebook group I am on??? The layout for the card was from the Freshly Made Sketches #311.  As you can see from the sketch below I flipped the sketch on it’s side.  You can do that with sketches.  It doesn’t have to be exactly the same.

The Designer Series paper is from the Bubbles and Fizz pack from Sale-A-Bration.

The sneakers are coloured with the inkpads and Aquapainter on Thick Whisper White.  When it was dry I went over it with the Night of Navy marker.

The sentiment is stamped on Lemon Lime Twist and cut with the 1 1/4″ circle Punch.  This was layered on a Silver Foil circle punched with the 1 3/8″ circle punch.  This was then layered on to a scalloped circle cut from the Layering Circle Thinlits.  I added some Silver Thread under the sentiment pice.

What’s that zig-zag edge from?  The card needed something in Night of Navy under the piece but I wasn’t sure what to use.  I had just used the Mini Treat Bag Thinlits and saw the Zig-Zag edge on the bag Framelit.  So I took a small strip of Night of Navy and cut a piece out with that.  The star is from one of the other die pieces in that Thinlits set.  I raised that up off the card and added an adhesive Rhinestone to the centre.

I was happy with the end result but certainly not as amazing as many of the other projects.

I hope you like it anyway and it might inspire you. 🙂

Jenny